Spacelog Apollo 13

Okay, Fred-o. Okay. This is “Entry, LM PREP.” Starts EI minus 6 hours. At that time, you power up the ACS. I think I'll give you a line at a time and, when I hear you say okay on that, I'll go to the next. That sound reasonable?

Okay. I'll go hot mike briefly.

Okay. BAT 5 -

Hey, how do you read now?

Okay. I read you okay, Fred. Okay. Battery 5 —

Okay …

Battery 5 NORMAL FEED ON is the first step.

Okay, Vance. That—Go ahead.

Okay. Use modified LM DPS/RCS 30-minute activation checklist.

Okay.

EI minus 5 hours. Midcourse-7, if required. Next: LM preentry procedure. And, Fred, the time on LM preentry procedure is just —

Okay. Go ahead.

Okay. The time on the LM preentry procedure is just as soon as you finish midcourse-7, or 5 hours -

All right, go ahead, Vance.

Okay.

Okay. I've got this TEI minus 5 hours, MCC-7 if required, and now you're going to start me a new procedure called LM preentry procedure. Go ahead.

Roger. Maneuver to SM SEP attitude. Configure for CSM hotfire.

Okay.

Under that, DEADBAND, MAX; and ATTITUDE CONTROL, three, to PULSE.

Okay.

Perform CSM hotfire. Maneuver back to SM SEP attitude.

Okay.

And under that, ATTITUDE CONTROL, PITCH and ROLL, PULSE; YAW, MODE CONTROL.

Okay. Next, EI minus 4 hours, 30 minutes. Configure for CM/SM SEP.

Okay. Hold on a minute.

Okay.

That was EI—EI minus 4-1/2?

That's correct.

Okay. That's EI minus 4-1/2 hours, configure for SM SEP.

That's affirm, and under that, BALANCE COUPLE, ON.

Okay.

AGS 404, plus 0; 405, plus 0; 406, plus 0; and 470, read out.

Okay. Got it.

Translate plus-X at 0.5 feet per second.

Okay.

Then CM/SM SEP. After SEP, null 470 —

Okay. stand by 1.

Okay.

Okay. Go ahead.

After SEP, null 470 to 0.

Okay.

ATTITUDE CONTROL, three of them, to PULSE.

Okay.

Pitch to acquire service module for photos.

Okay.

Okay. Note: use ACA for control.

Okay. We can use the ACA now for control.

Roger. EI minus 3 hours, maneuver and ATT HOLD for Moon view, attitude —

Wait a minute. Was that maneuver in ATT HOLD for Moon view. Is that right?

Okay.

Could you give us a readback on everything up to this point?

Okay. I'll go back to NORMAL VOICE. It might—Or is this pretty clear?

It's clear.

Okay. The master title, “Entry, LM PREP, EI minus 6 hours.” First, BAT 5 NORMAL FEED, ON; second, use modified LM DPS/RCS, 30-minute activation checklist. Next, is at TEI minus 5 hours, MCC-7, if required. Now, we have a LM preentry procedure. First, we maneuver to service module SEP attitude. Second, configure for CSM hotfire. Under that, DEADBAND MAX, and ATTITUDE CONTROL, three, to PULSE. Thirdly, perform CSM hotfire. Fourth, we—The LM maneuvers back to SM SEP attitude, with ATTITUDE CONTROLs, PITCH and ROLL to PULSE, ATTITUDE CONTROL, YAW, to MODE CONTROL. Now, you got that so far, Vance?

That's correct so far, Fred-o.

Okay. At EI minus 4-1/2 hours, configure for SM SEP. First, BALANCE COUPLE, ON. Secondly, zero the counters in AGS; 404, 405, 406, plus 0; read out 470. Thirdly, translate plus-X to 0.5 foot per second. Fourth, CM/SM SEP. Fifth, after SEP, null 470 to 0. Sixth, ATTITUDE CONTROL, three, to PULSE. Seventh, pitch to acquire service module for photos. And a note, use the ACA for control. Last, we had—you gave me was TEI minus 3 hours. Maneuver in ATT HOLD for Moon view until the CM platform release.

Okay, Fred. Only—Only a minor point that we just picked up. At the very top, EI minus 6 hours, the title is “power up,” above BAT 5 NORMAL FEED, ON.

Okay. The title above BAT 5 NORMAL FEED, ON, is “power up.”

Okay. And on the last, it was maneuver and ATT HOLD for Moon view attitude until CM platform release. I think that's what you read. Okay. Ready to go on? EI minus—Are you there?

Okay. Next is—Okay. Next is TEI minus what, Vance?

It's—It's EI minus 2-1/2 hours, Fred.

Okay. EI minus 2-1/2.

Okay. The title, “Power removal from CM LM umbilical.”

Okay. “Power removal from CM LM umbilical.”

That's correct. Next, assumes—This assumes all descent batteries on line.

Okay. I'll put that as a note.

And ASCENT BATTERIES 5 and 6 on NORMAL FEED.

Okay. This assumes all descent BATs on line, and ASCENT BATs 5 and 6 on NORMAL FEED. Go ahead.

Roger. Next, CSM CB LM POWER 1, MAIN B to open.

Okay. CSM, CB LM POWER 1, MAIN B, open.

Next. CB, LM POWER 2, MAIN B, open.

Okay. CSM, CB LM POWER 2, MAIN B, open.

CB EPS SENSOR SIGNAL, MAIN B to open.

Okay. CB EPS SENSOR SIGNAL, MAIN B, open.

Okay. Next, the LM. CB, EPS panels 11 and 16, CROSS TIE BALANCE LOADS to close.

Okay. On the LM side now. CB EPS 11, panels 11 and 16, CROSS TIE BAL LOADS, close.

That's correct. Next, CB EPS panel 16, BAT FEED TIE, two of them, open.

Okay. LM, CB EPS, panel 16, BAT FEED TIE, two, open.

Okay. CB EPS 16, ASCENT ECA CONTROL to close.

Okay. CB EPS panel 16, ASCENT ECA CONTROL, close.

Correct. BATTERY 1, HI VOLT—HIGH VOLTAGE to OFF/RESET.

Okay. BATTERY 1, HI VOLT, OFF/RESET.

BATTERY 5, OFF/RESET.

Okay. BATTERY 5, HI VOLT—or, it should be BATTERY 5 NORMAL FEED to OFF/RESET.

Roger. And—Stand by.

Or did you mean battery 2?

Yes. I think that's what he meant.

Okay. We mean BATTERY 5 to OFF/RESET.

Okay.

That's a NORMAL FEED.

BATTERY 5, NORMAL FEED—NORMAL FEED, OFF/RESET. Got you.

Okay. BAT 2, LOW VOLTAGE, OFF/RESET then ON.

Okay. BATTERY 2, LOW VOLT, OFF/RESET, then ON.

Next. BAT 2, HI VOLT, OFF/RESET, then ON.

Okay. You still there, Vance?